Philips HeartStart OnSite AED
Automated External Defibrillator
Designed for the ordinary person in the extraordinary moment, Philips HeartStart OnSite AED is ready to act and virtually ready to go. It allows anyone with little or no training to treat the most common cause of suspected sudden cardiac arrest (SCA) by delivering a shock quickly and effectively, wherever SCA happens. The OnSite AED provides practically real-time guidance through step-by-step voice commands from pad placement to performing CPR. When every minute counts, Philips HeartStart OnSite AED is the partner by your side. Side by side. Step by step.
Philips HeartStart OnSite AED - Features
Product Features
Ready to Act, Ready to Go
The Philips HeartStart OnSite AED arrives fully prepared for immediate deployment. It features a unique Ready-Pack setup, where the unit is already installed in a robust carry case with an Adult SMART Pads Cartridge and a durable battery positioned for instant use, ensuring you are equipped for emergencies from the moment you receive it. Additionally, an extra Adult SMART Pads Cartridge is provided for added readiness. To begin, just pull the green tab to start the initial self-test, then activate the device by pressing the clearly marked green On/Off button. Comprehensive voice commands and clear visual symbols will guide even novice users confidently through the critical steps of the life-saving procedure.
Start Quickly, Treat Confidently
The Philips HeartStart OnSite AED is equipped with sophisticated features to effectively handle sudden cardiac arrest situations. This AED offers a straightforward, user-friendly interface, enhanced by clear, sequential voice instructions and a real-time metronome that supports accurate CPR execution. It automatically performs extensive self-tests daily, weekly, and monthly. These tests meticulously examine the pads, internal circuits, waveform delivery systems, and battery levels, guaranteeing that the AED maintains peak operational readiness. With its comprehensive self-monitoring capabilities, you can depend on the Philips HeartStart OnSite AED for reliability and preparedness at all times.
Easy as 1-2-3
The Philips HeartStart OnSite AED features integrated SMART Pads that offer real-time feedback, tailoring voice commands to your actions and timing. The device ensures that it only progresses when you're ready, providing revised and repeated instructions to improve comprehension as needed. It intelligently detects the installation of the special Infant/Child SMART Pads cartridge, and it adjusts the CPR guidance and shock output to suit infants and children under 25 kg (55 lbs) or aged between 0-8 years. This flexibility makes the OnSite AED an indispensable and adaptable tool for emergencies, capable of being used effectively and safely on individuals of varying ages and sizes.
Advanced Technology
The Philips HeartStart Home AED is tailored for both adults and young children, offering a vital safety tool for household readiness. It is specifically designed for individuals under 25 kg (55 lbs) or aged 0-8 years and incorporates SMART Analysis technology to autonomously evaluate the heart rhythm of a distressed person. This sophisticated functionality ensures that shocks are administered only when absolutely necessary, thereby reducing the likelihood of inadvertent shocks. The AED will not issue a shock if a non-shockable rhythm is detected, even if the Shock button is activated. This essential safety feature supports both inexperienced and proficient users, allowing the HeartStart Home AED to be operated with assurance and accuracy during urgent situations.
Specifications
Specifications
Battery
- Type: 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
- Capacity: Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
- Install-by Date: Battery is labeled with an install-by date of at least five years from date of manufacture
- Standby Life: Four years typical when battery is installed by the install-by date (will power the AED in standby state within the specified standby temperature range, assuming one battery insertion test and no defibrillation uses)
SMART Pads
- Energy Delivered: Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
- How Supplied: Disposable cartridge, containing adhesive defibrillation pads, clicks into the defibrillator for an integrated pads solution
- Active Surface Area: 85 cm² (13.2 in²) each
- Cable Length: Adult pads: 137 cm (54"); Infant/Child pads: 102 cm (40")
- Use-by Date: Cartridge is labeled with a use-by date of at least two years from date of manufacture
What's Included
What's Included:
- Philips HeartStart OnSite AED with 8-Year Warranty
- Battery (one, pre-installed) 4-Year Warranty
- SMART Pads (one set, pre-installed)
- Setup/maintenance guide with expiration date tags
- Owner's manual
- Quick reference guide
- FREE Shipping
Advanced Product Specifications
Advanced Product Specifications
Product Specifications
- Defibrillation peak current - Adult: 32 A (150 J nominal) into a 50 ohm load
- Defibrillation peak current - Pediatric: 19 A (50 J nominal) into a 50 ohm load (using optional Infant/Child SMART Pads Cartridge)
- Quick Shock: Able to deliver a shock after the end of a CPR interval, typically in eight seconds
- Shock-to-Shock Cycle Time: Typically less than 20 seconds between shocks in a series
- Voice Instructions: Detailed voice messages guide the responder through the use of the defibrillator
- CPR Guidance: Instructions for adult and infant/child CPR available at user selection
- Shock Delivery: Via adhesive pads placed on the patient's bare skin as illustrated on pads
- Controls: Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
- Indicators: Ready light, blue i-button, caution light
Training Pads (optional)
- Special pads put HeartStart OnSite into training mode and disable its energy delivery capability
- Training pads feature 8 real-world training scripts
- Use with training mat (included) or with adapters on manikins
Automated and User-activated Self-tests
- Daily Automatic Self-tests: Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
- Pads Integrity Test: Specifically tests readiness-for-use of pads (gel moisture)
- Battery Insertion Test: Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
- Status Indicator: Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance
Data Recording and Transmission
- Infrared: Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
- Data Stored: First 15 minutes of ECG and the entire incident's events and analysis decisions
Environmental/Physical Requirements
- Sealing: Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
- Operating Temperature: 0 - 50 °C (32 - 122 °F)
- Operating Altitude: 0 to 4,500 m (0 to 15,000 ft)
- Standby Temperature: 0 - 43 °C (32 - 109 °F)
- Operating Humidity: 0 to 95 % relative humidity (non-condensing)
- Shock/Drop Abuse Tolerance: Withstands 1 meter drop to any edge, corner, or surface
- Standby Humidity: 0 to 75 % relative humidity (non-condensing)
- Vibration: Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
- Standby Altitude: > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft
- EMI (Radiated/Immunity): Meets EN55011 Group 1 Level B Class B and EN61000-4-3
| Manufacturer | Philips |
|---|
